产品中心 / PRODCUTS
发布时间: 2018 - 10 - 10
R2_Ladybug Bionic RobotAre you looking for a smart and fun toy to encourage your little ones to play and learn at the same time? This Ladybug Bionic Robot is such a one. As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS devotes itself in developing and marketing STEAM electronics. Currently, our product line covers 3 different types, listed below. 1)       Bionic Robots, for kids aged 3-10 years old;2)       3D Pens, for kids aged 7-15 years old;3)       Filaments, for 3D pens and all kinds of PDM 3D printers; Here, we will give a full introduction to our newly released Bionic Robots. As tactile learning toy, this Robot, controlled by Remote Control and imitatin...
发布时间: 2018 - 10 - 10
R3_Ladybug Bionic Robot DIY KitAre you looking for a smart and fun toy to encourage your little ones to play and learn at the same time? This Ladybug Bionic Robot is such a one.  As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS devotes itself in developing and marketing STEAM electronics. Currently, our product line covers 3 different types, listed below. 1)       Bionic Robots, for kids aged 3-10 years old;2)       3D Pens, for kids aged 7-15 years old;3)       Filaments, for 3D pens and all kinds of PDM 3D printers; Here, we will give a full introduction to our newly released Bionic Robot DIY Kit. As tactile learning toy, this Robot, controlled by Remote Cont...
发布时间: 2017 - 10 - 01
V2_3D Printing PenOur 3D Printing Pens allow kids to bring any, and all, ideas to life in 3D! As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS offers several different kinds of 3D Printing Pens. Some use high-heat, and some use low-heart, but all of them are BPA-Free and Non-Toxic Plastic, making them completely safe for kids to play with. As tactile learning toy, 3D Printing Pens inspire creativity, design, planning, building and spatial understanding – perfect for STEM learning!A. Product OverviewV2 a high-heat 3D printing pen, with no battery embedded. When it works, the working temperature of the filament reaches to 170-220℃. Children under the age of 8 have to be companied by parents or teachers. No touching the Nozzle when working.&#...
发布时间: 2017 - 11 - 07
X4_3D Printing PenOur 3D Printing Pens allow kids to bring any, and all, ideas to life in 3D! As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS offers several different kinds of 3D Printing Pens. Some use high-heat, and some use low-heart, but all of them are BPA-Free and Non-Toxic Plastic, making them completely safe for kids to play with. As tactile learning toy, 3D Printing Pens inspire creativity, design, planning, building and spatial understanding – perfect for STEM learning!A. Product Overview X4 is a low-heat 3D printing pen, with no battery embedded. When it works, temperature of the Nozzle remains about 10℃, and that of the filament remains 70-90℃. You can draw in hands or on bodies.B. Parameters      ...
发布时间: 2017 - 11 - 01
D8_3D Printing Pen Our 3D Printing Pens allow kids to bring any, and all, ideas to life in 3D!As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS offers several different kinds of 3D Printing Pens. Some use high-heat, and some use low-heart, but all of them are BPA-Free and Non-Toxic Plastic, making them completely safe for kids to play with. As tactile learning toy, 3D Printing Pens inspire creativity, design, planning, building and spatial understanding – perfect for STEM learning! A. Product Overview D8 is a low-heat 3D printing pen, with battery embedded. You can charge it before use, and the battery can last for about 30-50 minutes. When it works, temperature of the Nozzle remains about 15℃, and that of the filament remains 70-...
发布时间: 2017 - 11 - 18
D10_3D Printing Pen Our 3D Printing Pens allow kids to bring any, and all, ideas to life in 3D! As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS offers several different kinds of 3D Printing Pens. Some use high-heat, and some use low-heart, but all of them are BPA-Free and Non-Toxic Plastic, making them completely safe for kids to play with. As tactile learning toy, 3D Printing Pens inspire creativity, design, planning, building and spatial understanding – perfect for STEM learning! A. Product Overview D10 is a low-heat 3D printing pen, with battery embedded. You can charge it before use, and the battery can last for about 1.5 hours. When it works, temperature of the Nozzle remains about 10-20℃, and that of the filament rema...
发布时间: 2017 - 10 - 05
PLA Filament for 3D PrintingA. Brief IntroductionThis is one of the best filaments in the market. Our 1.75mm filament holds a diameter tolerance of 0.05mm, which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel.PLA allows higher print speed, more accurate placement with proper cooling (it does not shrink as much), and thinner build heights, because it has less resistance from the plastic coming out of the nozzle. B. Compatible 3D PrintersOur filaments are suitable for Makerbot, RepRap, UP, Flashforge, Leapfrog, Ultimaker, Printrbot and any other FDM 3D printer. At the same time, they can be used for all kinds of 3D printing pens. C. Filament ParameterParameterABSPLAMelting Point (℃)210-250180-220Diameter1.75mm/3mm1.75mm...
发布时间: 2017 - 10 - 09
ABS Filament for 3D Printing     A. Brief IntroductionThis is one of the best filaments in the market. Our 1.75mm filament holds a diameter tolerance of 0.05mm, which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel.B. Compatible 3D PrintersOur filaments are suitable for Makerbot, RepRap, UP, Flashforge, Leapfrog, Ultimaker, Printrbot and any other FDM 3D printer. At the same time, they can be used for all kinds of 3D printing pens.       C. Parameters           【Product Name】:ABS Filament                            【Shape】:Round          【Roundness】: +/-0.02m...
发布时间: 2017 - 10 - 05
PCL Filament for 3D PrintingA. Brief Introduction This is one of the best filaments in the market. Our 1.75mm/3mm filament holds a diameter tolerance of 0.05mm, which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1KG (2.2lb) reel.  B. Compatible 3D Printers Our filaments are suitable for Makerbot, RepRap, UP, Flashforge, Leapfrog, Ultimaker, Printrbot and any other FDM 3D printers. At the same time, they can be used for all kinds of 3D printing pens. C. Parameters                 【Product Name】:PCL Filament                                  【Shape】:Round          &...
产品中心 / HOT PRODCUTS More
发布时间: 2018 - 10 - 10
R2_Ladybug Bionic RobotAre you looking for a smart and fun toy to encourage your little ones to play and learn at the same time? This Ladybug Bionic Robot is such a one. As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS devotes itself in developing and marketing STEAM electronics. Currently, our product line covers 3 different types, listed below. 1)       Bionic Robots, for kids aged 3-10 years old;2)       3D Pens, for kids aged 7-15 years old;3)       Filaments, for 3D pens and all kinds of PDM 3D printers; Here, we will give a full introduction to our newly released Bionic Robots. As tactile learning toy, this Robot, controlled by Remote Control and imitatin...
发布时间: 2018 - 10 - 10
R3_Ladybug Bionic Robot DIY KitAre you looking for a smart and fun toy to encourage your little ones to play and learn at the same time? This Ladybug Bionic Robot is such a one.  As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS devotes itself in developing and marketing STEAM electronics. Currently, our product line covers 3 different types, listed below. 1)       Bionic Robots, for kids aged 3-10 years old;2)       3D Pens, for kids aged 7-15 years old;3)       Filaments, for 3D pens and all kinds of PDM 3D printers; Here, we will give a full introduction to our newly released Bionic Robot DIY Kit. As tactile learning toy, this Robot, controlled by Remote Cont...
发布时间: 2017 - 10 - 01
V2_3D Printing PenOur 3D Printing Pens allow kids to bring any, and all, ideas to life in 3D! As a professional STEAM Education related products manufacturer and service provider, ZEROPLUS offers several different kinds of 3D Printing Pens. Some use high-heat, and some use low-heart, but all of them are BPA-Free and Non-Toxic Plastic, making them completely safe for kids to play with. As tactile learning toy, 3D Printing Pens inspire creativity, design, planning, building and spatial understanding – perfect for STEM learning!A. Product OverviewV2 a high-heat 3D printing pen, with no battery embedded. When it works, the working temperature of the filament reaches to 170-220℃. Children under the age of 8 have to be companied by parents or teachers. No touching the Nozzle when working.&#...
发布时间: 2017 - 10 - 05
PLA Filament for 3D PrintingA. Brief IntroductionThis is one of the best filaments in the market. Our 1.75mm filament holds a diameter tolerance of 0.05mm, which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel.PLA allows higher print speed, more accurate placement with proper cooling (it does not shrink as much), and thinner build heights, because it has less resistance from the plastic coming out of the nozzle. B. Compatible 3D PrintersOur filaments are suitable for Makerbot, RepRap, UP, Flashforge, Leapfrog, Ultimaker, Printrbot and any other FDM 3D printer. At the same time, they can be used for all kinds of 3D printing pens. C. Filament ParameterParameterABSPLAMelting Point (℃)210-250180-220Diameter1.75mm/3mm1.75mm...
案例展示 / CASE STUDIES More
发布时间: 2014 - 11 - 14
Butterflies
发布时间: 2017 - 09 - 01
Owl
发布时间: 2017 - 10 - 13
Peacock
发布时间: 2017 - 10 - 13
Olympic Mascots
News / 新闻动态
How to Choose Printing Filament Two
How to choose printing Filaments? This is a question that every customer who comes into contact with our products will ask. In our products, we usually use the following 2 kinds of printing Filaments, PLA and ABS. Today, we will mainly introduce the characteristics of ABS.ABS resin is one of the five synthetic resins. It is a terpolymer composed of acrylonitrile (A), butadiene (B) and styrene (S). The relative content of the three monomers can be changed arbitrarily and made into various resins. ABS has the common properties of both three components, A makes it chemical corrosion resistance, heat resistance, and a certain degree of surface hardness, B makes it high elasticity and toughness, S makes it thermoplastic processing molding characteristics and improve electrical properties.ABS resin has excellent impact resistance, heat resistance, low temperature resistance, chemical resistance and electrical properties, but also with easy processing, product size stability, good surface glo...
2018 - 08 - 28
PLA vs ABS
Next we will compare the merits and demerits of PLA materials and ABS materials: ShortcomingAdvantagePrint parametersPLA1. it is not easy to remove support. 2. the impact resistance is lower and the strength is lower. 1. biodegradable materials, environmental protection;2. print products with high gloss.3. good fluidity, printing products are not easy to crack.4. printing large area products is not easy to raise.5. there is no smell in the printing process. 1. sprinkler head temperature: 190-210 C2. platform temperature: 50 C3. platform processing: large area products need 3M glue / glue, small area products need not be processed. ABS1. large area products are easy to raise.2. the temperature of the platform needs to be heated to 80-110 C.3. the printing room will have plastic taste.4. print products are easy to crack, easy to stick, and easy to fall off. 1. excellent mechanical properties and excellent impact strength.2. it is easier to remove support.3. ...
2018 - 08 - 28
How to Choose Printing  Filament One
How to choose printing Filaments? This is a question that every customer who comes into contact with our products will ask. In our products, we usually use the following 2 kinds of printing Filaments, PLA and ABS. Today, we will mainly introduce the characteristics of PLA. PLA, PLA:polylactic acid, is a heat sensitive rigid plastic with low environmental impact. Starch is extracted from corn, cassava and other plants through a number of processes, fermented into lactic acid by microorganisms, and then polymerized into polylactic acid.PLA has good thermal stability, processing temperature 170 - 230 C, good solvent resistance, can be processed in a variety of ways, such as extrusion, spinning, biaxial stretching, injection blow molding, etc. In addition to being biodegradable, PLA has many excellent properties, such as biocompatibility, high gloss, good transparency, good handle and heat resistance, as well as certain bacterial resistance, flame retardancy and UV resistance.In view ...
2018 - 08 - 28
How to Choose Printing Filament Two
How to choose printing Filaments? This is a question that every customer who comes into contact with our products will ask. In our products, we usually use the following 2 kinds of printing Filaments, PLA and ABS. Today, we will mainly introduce the characteristics of ABS.ABS resin is one of the five synthetic resins. It is a terpolymer composed of acrylonitrile (A), butadiene (B) and styrene (S). The relative content of the three monomers can be changed arbitrarily and made into various resins. ABS has the common properties of both three components, A makes it chemical corrosion resistance, heat resistance, and a certain degree of surface hardness, B makes it high elasticity and toughness, S makes it thermoplastic processing molding characteristics and improve electrical properties.ABS resin has excellent impact resistance, heat resistance, low temperature resistance, chemical resistance and electrical properties, but also with easy processing, product size stability, good surface glo...
2018 - 08 - 28
Arts Exposure Leads to Increased STEM Patents
Good news for parents: Those piano lessons or random toy parts littering your floors may one day lead to the next scientific breakthrough. That’s according to new Michigan State University research linking childhood participation in arts and crafts activities to patents generated and businesses launched as adults. In the study, which is published in the most recent edition of the journal Economic Development Quarterly, the researchers defined “childhood” as up to 14 years old. The team of multidisciplinary researchers studied a group of MSU Honors College graduates from 1990 to 1995 who majored in science, technology, engineering or mathematics, or STEM. They found of that group, those who own businesses or patents received up to eight times more exposure to the arts as children than the general public. “The most interesting finding was the importance of sustained participation in those activities,” said Rex LaMore, director of MSU’s Center for Community and Economi...
2018 - 08 - 28
Promotion for Christmas
We’re now working hard on the solution for Christmas promotion. Keep a close eye on us, and do not miss it.
2018 - 08 - 28
Copyright ©2018 - 2020 Elegant home fashion style originality
犀牛云提供企业云服务
Add.:No.28, Central Rd., Shajing, Bao’an District, Shenzhen, Guangdong, P.R.C 518104
Company Name:Lingjia Electronics (Shenzhen) Co.Ltd
X
1

QQ设置

等待加载动态数据...

等待加载动态数据...

展开